Update the firmware
When new features are developed or bugs are fixed we will release new versions of the SCK firmware.
Updating your kit is very simple
-
Connect your kit with a micro USB cable to your computer.
-
Double click the reset button of your SCK, the SCK led should turn green and a new drive called SCK-20 should appear on your computer file browser.
- Inside the SCK-20 drive you should see some files, double click the INDEX.HTM file and our github releases page will open in your browser. Download the new firmware called SAM_firmware_XXX.uf2 and save it to your computer.
Tip
You can backup your current firmware version just saving the file called CURRENT.UF2.
- Simply drag the firmware file you downloaded over the SCK-20 drive, your kit led will blink in green and after some seconds it will reset and start with the new version.
- After the update you just done, when your SCK gets connected to the network it will check for an updated versión of the wifi chip (ESP8266) firmware. If there is a new version your SCK will update automatically.